Greater Value. Good Move. Yield and quality matter. But there’s more. Our goal is to provide a higher standard for forage to maximize ROI– while keeping your wallet in mind. We take pride in delivering proven products that increase the bottom line at a good price.
Erosion control for slopes ranging from mild to steep (≤2H:1V) with a typical application rate of 3,500-4,000 lbs./acre. Once applied and cured, forms an intimate bond with the soil surface to create a continuous, porous, absorbent and flexible erosion-resistant blanket that allows for rapid germination and accelerated plant growth.
Erosion control for slopes ranging from mild to severe (≤0.25H:1V) with a typical application rate of 3,500-4,000 lbs./acre. Flexterra FGM rapidly sets a standard of excellence for controlling erosion and establishing vegetation on severe slopes.
Great for general seeding (≤ 4:1) with a typical application rate of 1,500-2,000 lbs./acre. TerraMulch 80/20 can be used in all machines and is high quality; clean, 100% cellulose fiber mixes in water at an accelerated rate and stays in suspension for more uniform consistency. Provides control that is superior to straw for nearly the same cost — making it ideal for general seeding.
Erosion control and revegetation for mild slopes (≤3H:1V) with a typical application of 2,000-2,500 lbs./acre. Covers up to 20% more ground than cellulose and provides superior erosion control and more complete germination without a big jump in price.
Ideal choices for critical sites up to 2:1 slopes with a typical application of 2,000-2,500 lbs./acre. Thermally Refined Wood Fiber mulch delivers up to 50% more water-holding capacity than atmospherically refined wood mulch for superior, more cost-effective performance. TriFlo additives provide better yield, easier shooting and increased distance.
Erosion control and revegetation for moderate slopes (≤2H:1V), 100% wood fiber just like Conwed 1000 with the addition of a premium tackifier. Tackifier is a pre-blended, high-viscosity, organic polysaccharide tackifier for superior erosion control performance. All-in-one package eliminates the extra step and potential errors associated with mixing tackifiers.
CoverGrow™ is an advanced technology granular mulch made from recycled wood and cellulose fibers. Once applied to a seeded area and activated by water, the granules quickly expand and disperse to provide outstanding protection and water-holding performance right where it’s needed. Whether you’re spot treating smaller bare spots or hydroseeding larger areas, CoverGrow™ is the easy and convenient way to establish vegetation.
Typical application rate of 30-60 lbs./acre. Requires no cure time to be effective! University tests and field use prove it effectively reduces soil erosion and water runoff immediately after hydroseeding. Also increases the waterholding capacity of all types of hydraulic mulches.
PAM-12 Plus® can also be used as hydromulch.